Equipped with a powerful professional steam car wash machine, you can save money and time without compromising on the quality of washing. But knowing the right way to wash a car yourself means you can remove even the most complicated impurities without damaging the paintwork, optics, and plastic trim. Let’s take a look at the 3 tricks of washing your car by hand with Fortador.
Choosing the right equipment
Car owners who really care about their ‘iron horse’ and take the time to look after it properly prefer to wash it themselves using a steam cleaner. Steam car wash price is cheaper than car washes. To do so, the car enthusiast would need the following equipment:
- suede cloth;
- microfibre cloth;
- telescopic brush with foam roller and water nozzle;
- sponge pad;
- steam cleaner for cars;
- wheel brush for cleaning the rims;
- plenty of water.
The water may be an artificial or natural body of water (provided that no dirty water can get into it). Alternatively, it can be tap water. Shampoo for such a car wash depends on the hardness of the water used and the level of dirt on the car.
Wash the car by hand, step by step
Handwashing is the easiest way to clean your car. But every job needs a bit of care. Here are the stages for a proper wash.
Step one: Pour a large amount of water over the car from top to bottom
The car body is washed with a large amount of water, the wheels are usually the dirtiest area. Glasses need less moisture. We, therefore, remove the first layer of dirt, i.e., the various organic and silicate particles, from the surface of the body.
Step two: Soap up the car
The cleaner is needed to remove the second layer, which is made up of soot, tar, and a mixture of exhaust gases and dust. To do so, use a porous sponge, moisten it generously with water diluted with shampoo. The water in the bucket must be warm to dissolve the detergent properly so that it forms a washable composition. Then let the shampoo have its effect on the dirt. While you are waiting, you can remove dirt deposits from the wheel rims with a scrubber or car wash steamer.
Step three: Rinse off the detergent with plenty of water
Whisk the car with a bucket of water and clean the soapy areas with a foam roller and a water scraper. The steam car wash can also be used. The steam cleaner is used to remove excessive amounts of moisture from the windows.
Carefully remove any residual water and detergent
Remove any unwanted moisture with special chamois leather or microfibre cloths. Make sure there are no streaks on the body and windows. If there are any, you will have to repeat the rinsing procedure all over again. Washing should be done on:
- car bodywork;
- wheel rims;
- interior surfaces.